| Standard No. | Title | Corresponding
International Standard | Applicable Model |
|---|
| IEC 61265:1995 | Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave-band sound pressure levels in noise certification of transport-category aeroplanes | | |
| IEC 61260-3: 2016 | Octave-band and fractional-octave-band filters - Part 3: Periodic tests | | |
| IEC 61672-1:2013 | Sound level meters - Part 1: Specifications | JIS C 1509-1 | NA-28,NL-42A,NL-52A,NL-62A,NL-27 |
| IEC 61672-2:2013 | Sound level meters - Part 2: Pattern evaluation tests | JIS C 1509-2 | |
| IEC 61672-3:2013 | Sound level meters - Part 3: Periodic tests | | |
| IEC 60050-801:1994 | International Electrotechnical Vocabulary - Chapter 801: Acoustics and electroacoustics | JIS Z 8106 | |
| IEC 60034-9:2003 | Rotating electrical machines - Part 9: Noise limits | JIS C 4120 | |
| IEC 61400-11:2012 | Amendment 1 - Wind turbines - Part 11: Acoustic noise measurement techniques | | |
| IEC 60263:2020 | Scales and sizes for plotting frequency characteristics and polar diagrams | | |
| IEC 60655:1979 Withdrawn | Values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones | | |
| IEC 60704-1:2010 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements | | |
| IEC 60714 Ed. 1.0 | Expression of the properties of spectrum analyzers | | |
| IEC 60942: 2017 | Sound calibrators | JIS C 1515 | NC-72B,NC-75 |
| IEC 61012:1990 | Filters for the measurement of audible sound in the presence of ultrasound | | |
| IEC 61043:1993 | Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones | JIS C 1507 | |
| IEC 61094-1:2000 | Measurement microphones - Part 1: Specifications for laboratory standard microphones | | |
| IEC 61094-2:2009 | Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique | | |
| IEC 61094-3:2016 | Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique | | |
| IEC 61094-4:1995 | Measurement microphones - Part 4: Specifications for working standard microphones | | |
| IEC 61094-5:2016 | Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison | | |
| IEC 61094-6:2004 | Measurement microphones - Part 6: Electrostatic actuators for determination of frequency response | | |
| IEC TS 61094-7:2006 | Measurement microphones - Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones | | |
| IEC 61183:1994 | Random-incidence and diffuse-field calibration of sound level meters | JIS C 1508 | |
| IEC 61260-1: 2014 | Octave-band and fractional-octave-band filters - Part 1: Specifications | JIS C 1514 | NA-28,NX-42RT,NX-62RT,VX-55RT,SX-A1RT,AS-70,CAT-WAVE |
| IEC 61260-2:2016 | Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests | | |
| IEC 61400-11:2012 | Wind turbines - Part 11: Acoustic noise measurement techniques | | |